115
Using FlexColor with a Feeder
Introduction
Some Flextight scanner models either include or can be fitted with a
batch feeder, which enables you to set up a series of images and then scan
them all at once without needing to stand at the scanner and monitor
progress. As of this writing, the following batch-feeder options are
available:
• Flextight Batch Feeder: holds several standard, flexible original holders
of nearly any transparency format. is is an optional add-on for
Flextight 848 and 949 scanners.
• Mounted Slide Feeder: holds up to 50 mounted slides. is is an
optional add-on for Flextight 949 scanners.
• Flextight RF: a scanner dedicated to scanning roll films. Each exposure
on the roll is saved as a separate file.
Each of these batch-feeder options is specifically supported in FlexColor.
Feeder Mounting and Maintenance
For batch feeders that can be mounted and removed from your scanner,
use the Maintenance > Feeder menu command of FlexColor to mount
and maintain your feeder. is command opens the Feeder window.
e following controls are available here:
To Next Page
Loading...
