127
Preventive maintenance
All Flextight scanners should be serviced every 25,000 scans or every 12
months, whichever comes first. If a Feeder is mounted, the recommended
number of scans is 15,000 provided that the feeder is mounted for all
scans. Please note that previews are also counted as scans.
Newer Flextight scanners have a counter installed so as the number of
scans can be monitored. Please refer to the manual to learn more about
monitoring the number of scans.
Failures or faults originating from lack of service and/or daily
maintenance are not covered by the factory warranty.
To Next Page
Loading...
Need help?
General
