23
Frame Use this pop-up menu to set the film format (size) of
the original you are scanning. is setting mirrors the Frame
setting on the General tab of the Setup window. See “General
Tab” on page 38 for more information.
Selecting the Customize... entry from the list enables the
creation of your own custom frames. See “Custom Frames” on
page 31 for details.
Auto Frame Button: Toggles the Automatic Frame. When the
function is enabled the scanner will automatically read the
current original holder’s identification code (a combination of
small rectangular holes at the holder’s leading edge) and adjust
the Frame settings accordingly.
e button reflects the setting of the Automatic Frame
Recognition check box on the Scanner tab of the Preferences
window. See “Preferences” on page 53 for details.
e button is only available for scanners supporting the
Automatic Frame Recognition function!
Mode Use this pop-up menu to set the scan mode (RGB, RGB 16 bit,
Grayscale, Grayscale 16 bit, Lineart, or CMYK). is setting
mirrors the Mode setting on the General tab of the Setup
window. See “General Tab” on page 38 for more information.
Keyboard Shortcuts
See “Appendix” on page 124 for related keyboard shortcuts.
Auto Focus Controls
Only available if your scanner supports the Auto Focus function!
Auto focus: is check box toggles the Auto Focus function
on/off. Before the final scan the scanner performs a quick
focusing in a horizontal line in the center of the current
cropping area.
To Next Page
Loading...
Need help?
General
