18
The Maintenance Menu
e Maintenance menu includes entries that are used for calibrating and
upgrading the scanner. e functions of these entries will depend on the
model of Flextight scanner you are using.
• Focus Calibration: Opens the Calibration window, which calibrates
the focus and sizing of the scanner. See your scanners hardware
documentation for details of when and how to perform this calibration.
This function does not apply to the Flextight Photo and 343 scanners.
• White Calibration: Initiates a white calibration scan for reflective
originals.
See your scanners hardware documentation for details of when and how
to perform this calibration.
Only scanners that support reflective scanning require this function.
• Feeder: Opens the Feeder window, which allowe Mounting and Un-
mounting of Feeders, as well as adjusting and trouble shooting . See the
Feeder documentation for further details.
The Window Menu
To Next Page
Loading...
Need help?
General
