Part 1: For All FlexColor Users
Instant Approval Architecture
Figure 3: Approval-level display and control in the preview window
Modify Thumbnail Setups by Approval Rating
The Modify function of the thumbnail window enables you to modify the settings for
several images at once. You are able to control whether your changes will apply to all
images, selected images or to all images of a given approval rating.
The Modify window has changed in several ways since FlexColor 4.0. See “Importing
Camera Images” on page 22 for details, including how to apply settings by approval
rating.
Import by Approval Rating
The Import function enables you to load images from your digital camera (or from a
folder) after you have been shooting while not connected to your computer. When you
do this, you can filter the import by approval rating; for example, you might only
import your green shots.
The import function has changed in several ways since FlexColor 4.0. See “Importing
Camera Images” on page 22 for details, including how to import images by approval
rating.
FlexColor 4.5 Documentation Addendum 10
To Next Page
Loading...
Need help?
General
