9
OS X Requirements
OS X V 10.2.1 or later is required. We recommend updating to the latest
release available.
Devices can be connected by either SCSI or FireWire. Please note that if
you are connecting a SCSI device through a SCSI to FireWire device it
will be represented as a FireWire device – that is the bus number in the
device window will be 9.
To be recognized by OS X, devices connected to a standard SCSI adapter
must be present when booting the Mac. A SCSI device connected via a
SCSI to FireWire adapter will be recognized when the adapter is plugged
in. e SCSI device itself must be turned on before connecting the
adapter to FireWire or rebooting. In OS X the required memory for the
application is automatically allocated.
Support for non-admin users
User defined settings, batch presets and various calibration files are
located in <user home>/Library/Application Support/FlexColor where
write support is guaranteed. e standard settings are now located inside
the application bundle - therefore you are free to move the FlexColor
application to any location without losing access to these standard
settings.
Preferences file
FlexColor uses the OS X standard format for preference files.
e file name is dk.Hasselblad.FlexColor.plist.
To Next Page
Loading...
Need help?
General
