32
Soware Reference - FlexColor 4.0 for Flextight Scanners
e Setup Window
42 General Tab
When a frame is selected its current settings are displayed in the Frame
Info section. Click the small triangle to the le to display the settings if
not already displayed.
• Click the New... button. e Create new Custom frame window
appears.
If the Scan holder checkbox is checked when the window appears,
your scanner supports scanning of original holder frames as described
in “Scanning of Original Holder Frames” on page 34. Type a name that
will help you remember the format and click on Create. The new frame
is added to the frame list using the specifications of the frame currently
selected in the Frame pop-up menu.
• Select the appropriate holder type from the Type pop-up menu and edit
the Width, Height and Vertical Offset values to match your frame.
To Next Page
Loading...
