Starting up/Setup mode
MP85A A0293_06_E00_03 HBM: public 55
Important
Use only standard MMC/SD cards, not MMCplus
TM
, SecureMMC,
MMCmobile
TM
, SDHC (SD High Capacity), SDXC cards (SD eXtended
Capacity) or other cards. Format the MMC or SD card with FAT16; FAT32,
NTFS or other formats are not permitted. Reformat your card if necessary.
Tip
To optimize the access times of the MMC/SD card, defragment or reformat it at
regular intervals.
Displays relating to the MMC/SD card
Display Meaning
Unused Do not save any data to the memory card.
When anything else is displayed, you should save data to the
memory card.
No memory
card
The device has no memory card inserted.
Init... The memory card is initialized automatically on insertion.
SET ³ STOP The memory card is ready to save. Pressing SET changes the
status to Stop. You can then remove the memory card.
Saving Data is being copied onto the memory card. Once copying is
complete, the status changes to “Ready” and SET ³ STOP appears
on the display.
To Next Page
Loading...
