July 2010 25 – 415
Laser system (e.g., TL Micro 150) for tool measurement
This laser system is used to measure tools (e.g., length, radius, individual teeth).
Tools can be examined for breakage.
Tool wear can be determined.
Infrared
transmission
360° range:
The LEDs and receiver modules for infrared transmission are evenly distributed on the
circumference of the touch probe. This ensures a 360° transmission range for reliable reception
without previous spindle orientation.
Beam angle:
To adapt the touch probes to varying machine designs, the touch probes are available with
horizontal transmission elevations of 0° or +30°.
Laser radiation! Do not stare into the beam! Laser class 2.
To Next Page
Loading...
