July 2010 27 – 459
X8:
Analog output
1 to 6
D-sub connector, 15-pin
X9:
Analog output
7 to 13
D-sub connector, 15-pin
There is no connector X9 on the MC 422 C.
MC 42x (B/C) Connecting cable
Female Pin layout Male Color
1 Analog output 1: ±10 V 1 Brown
2 Do not assign 2 Brown/Green
3 Analog output 2: ±10 V 3 Yellow
4 Analog output 5: ±10 V 4 Red/Blue
5 Analog output 3: ±10 V 5 Pink
6 Analog output 5: 0 V 6 GY/PK
7 Analog output 4: ±10 V 7 Red
8 Analog output 6: ±10 V 8 Violet
9 Analog output 1: 0 V 9 White
10 Do not assign 10 WH/GY
11 Analog output 2: 0 V 11 Green
12 Do not assign 12
13 Analog output 3: 0 V 13 Gray
14 Analog output 4: 0 V 14 Blue
15 Analog output 6: 0 V 15 Black
Housing External shield Housing External shld.
MC 42x (B) Connecting cables
Female Pin layout Male Color
1 Analog output 7: ±10 V 1 Brown
2 Analog output 13
a
: ±10 V
a. Only for MC 422 B, but not for MC 422
2 Brown/Green
3 Analog output 8: ±10 V 3 Yellow
4 Analog output 11: ±10 V 4 Red/Blue
5 Analog output 9: ±10 V 5 Pink
6 Analog output 11: 0 V 6 GY/PK
7 Analog output 10: ±10 V 7 Red
8 Analog output 12: ±10 V 8 Violet
9 Analog output 7: 0 V 9 White
10 Analog output 13
a
: 0 V 10 WH/GY
11 Analog output 8: 0 V 11 Green
12 Do not assign 12
13 Analog output 9: 0 V 13 Gray
14 Analog output 10: 0 V 14 Blue
15 Analog output 12: 0 V 15 Black
Housing External shield Housing External shld.
X8, X9: The interface complies with the requirements of EN 61800-5-1 for "protective extra-
low voltage" (PELV).
X8, X9: Only units that comply with the requirements of EN 61800-5-1 for "protective extra-
low voltage" (PELV) may be connected.
To Next Page
Loading...
