July 2010 28 – 529
An important part of the working area is a suitable working surface with a wrist strap with
1 MOhm grounding resistance for grounding the person:
Information
on possible errors
If possible, write the assumed error or circumstances that caused the failure of the unit on a slip
of paper and apply it to the outside of the unit.
ID numbers for
service order
When placing a service order, always indicate the ID number of the HEIDENHAIN device
concerned.
Serial number for
traceability
To ensure traceability also indicate the serial number of the HEIDENHAIN device. The serial
number as well as the ID number can be found on the ID label of the device.
Replacement controls are delivered with a form which you can use to provide information
on the error of the defective control.
Since the iTNC 530 consists of two components (MC and CC) you can exchange each
component individually or both together.
When sending us both components, do not forget to state both ID numbers.
The ID number of the MC can be found on the front panel or on the right side of the housing.
The ID number of the CC can be found on the underside of the base plate of the housing.
To Next Page
Loading...
