HEIDENHAIN ITNC 530 - Page 581

July 2010 30 – 581
MP111.x Position encoder input for the spindle(s)
Input: 0: No position encoder input
1 to 6: Position encoder inputs X1 to X6
35 to 38: Position encoder inputs X35 to X38
201 to 214: Position encoder inputs X201 to X214
REF
MP111.0 Position encoder input for the first spindle
MP111.1 Position encoder input for the second spindle
MP112.x Assignment of speed encoder inputs to the axes
Input: 0: No speed encoder input
15 to 20: Speed encoder inputs X15 to X20
80 to 85: Speed encoder inputs X80 to X85
RESET
MP113.x Speed encoder for the spindle/spindles
Input: 0: No speed encoder input
15 to 20: Speed encoder inputs X15 to X20
80 to 85: Speed encoder inputs X80 to X85
REF
MP113.0 Speed encoder for the first spindle
MP113.1 Speed encoder for the second spindle
MP115.0 Position encoder input 1 Vpp or 11 µApp
Format: %xxxxxxxxxxx
Input: Bit 0 to bit 5: Position encoder inputs X1 to X6
Bit 6 to bit 9: Position encoder inputs X35 to X38
Bit 10: No function
0: 1 Vpp
1: 11 µApp
RESET
MP115.1 Reserved
Format: %xxxxxxxxxxx
Input: Enter %00000000000
MP115.2 Input frequency of position encoder inputs
Format: %xxxxxxxxxxx
Input: Bit 0 to bit 5: Position encoder inputs X1 to X6
Bit 6 to bit 9: Position encoder inputs X35 to X38
Bit 10: No function
With 1 Vpp:
0: 27 kHz
1: 400 kHz
With 11 µApp:
0: 27 kHz
1: 140 kHz
MP Function and input SW version
and
behavior