HemoCue 201 DM Reference Manual

70
Password for protected functions
Some Analyzer functions are password
protected. The password protection function
is only activated when the Operator ID
requirement is set to “Not Used”.
Old Password (1 -10)
Password
1
5
2
87
4 6
9
3
0
11
55
22
8877
44 66
99
33
00
AB CAB C
2
3
1
FIGURE 3-49
When the Password button is pressed in the
General Settings menu (see FIGURE 3-46),
the settings for Password are displayed.
Numbers in brackets show the lowest and
the highest allowable number of characters.
a) To change the password, enter the Old
Password using the Digit buttons(1) and
the Letter buttons that are displayed
when the Text Mode button(2) is pressed.
(The default password is 0000).
b) Press the Confirm button(3).
1 Digit button
2 Text mode button
3 Confirm button
New Password (1 -10)
Password
1
5
2
87
4 6
9
3
0
11
55
22
8877
44 66
99
33
00
AB CAB C
4
FIGURE 3-50
c) Enter the New Password.
d) Press the Confirm button(4).
e) FIGURE 3-50 will be displayed again.
Verify the New Password by re-entering
it.
f) Press the Confirm button to return to the
General Settings menu (see FIGURE
3-46).
If the re-entered password is incorrect, a
display with the text Invalid Entry
will be displayed. Press the back arrow to
return to the previous display.
4 Confirm button

HemoCue 201 DM Specifications

General

Brand	HemoCue
Model	201 DM
Category	Docking Station
Language	English