Figure 7-1 Add Administrator
2. Enter the new user's parameters.
ID (Employee ID)
By default, the ID No. will be increased in sequence. You can edit the ID according to your
preference.
Note
• The ID refers to the user
aendance serial No.
• The ID should be between 1 and 99999999 and should not start with 0.
• The ID should be used for once.
Name
Enter the new user name.
Note
• Press the up or down key on the keypad to change the input method.
• Up to 64 characters are allowed in the user name.
Card
Set: Swipe card on the card swiping area or enter card No. manually, and select a card
property.
DS-K1T804B Series Fingerprint Access Control Terminal User Manual
16
To Next Page
Loading...
