ERT-F2xxx DVR User Manual
UM ERT-F2xxx 030118NA 134
˗ Local Advanced Operation: Operating HDD management (initializing HDD, setting HDD property),
upgrading system firmware, clearing I/O alarm output
˗ Local Shutdown Reboot: Shutting down or rebooting the DVR
• Remote Configuration
˗ Remote Log Search: Remotely viewing logs that are saved on the DVR
˗ Remote Parameters Settings: Remotely configuring parameters, restoring factory default
parameters and importing/exporting configuration files
˗ Remote Camera Management: Remote adding, deleting and editing of the IP cameras
˗ Remote Serial Port Control: Configuring settings for RS-232 and RS-485 ports
˗ Remote Video Output Control: Sending remote button control signal
˗ Two-Way Audio: Realizing two-way radio between the remote client and the DVR
˗ Remote Alarm Control: Remotely arming (notify alarm and exception message to the remote client)
and controlling the alarm output
˗ Remote Advanced Operation: Remotely operating HDD management (initializing HDD, setting HDD
property), upgrading system firmware, clearing I/O alarm output
˗ Remote Shutdown/Reboot: Remotely shutting down or rebooting the DVR
• Camera Configuration
˗ Remote Live View: Remotely viewing live video of the selected camera(s)
˗ Local Manual Operation: Locally starting/stopping manual recording and alarm output of the
selected camera(s)
˗ Remote Manual Operation: Remotely starting/stopping manual recording and alarm output of the
selected camera(s)
˗ Local Playback: Locally playing back recorded files of the selected camera(s)
˗ Remote Playback: Remotely playing back recorded files of the selected camera(s)
˗ Local PTZ Control: Locally controlling PTZ movement of the selected camera(s)
˗ Remote PTZ Control: Remotely controlling PTZ movement of the selected camera(s)
˗ Local Video Export: Locally exporting recorded files of the selected camera(s)
Click OK to save the settings and exit interface.
Only the admin user account has permission to restore the factory default parameters.