ERT-F2xxx DVR User Manual
UM ERT-F2xxx 030118NA 94
Event Hint Settings Interface
Click OK to finish the settings.
Full Screen Monitoring
When an alarm is triggered, the local monitor (VGA and HDMI
™
monitor) displays in full screen the video
image from the alarming channel configured for full screen monitoring.
If alarms are triggered simultaneously in several channels, their full-screen images will be switched at an
interval of 10 seconds (default dwell time). A different dwell time can be set by going to Menu >
Configuration > Live View > Full Screen Monitoring Dwell Time.
Auto-switch will terminate once the alarm stops, and you will be taken back to the Live View interface.
Select the channel(s) you want to make full screen monitoring in the Trigger Channel settings.
Audible Warning
Trigger an audible beep when an alarm is detected.
Notify Surveillance Center
Sends an exception or alarm signal to the remote alarm host when an event occurs. The alarm host refers to
the PC installed with a remote client.
The alarm signal will be transmitted automatically at detection mode when the remote alarm host is
configured. Refer to Chapter 11.2.6 Configuring More Settings for details.
To Next Page
Loading...
Need help?
General