HIMA HIMax User Manual

HIMax System 1 Introduction
HI 801 001 E Rev. 4.01 Page 7 of 122
1 Introduction
The System Manual describes the configuration and mode of operation of the safety-related
HIMax controller system.
HIMax can be used for various control tasks within the process and factory automation
industry.
1.1 Structure and Use of the Document
This System Manual is composed of the following chapters:
Safety Information on how to safely use the HIMax system
Product Description Structure of the HIMax systems
Communication
Brief description of the communication between the HIMax and
other systems. For more information, refer to the Communication
Manual HI 801 101 E.
Redundancy Options for increasing availability
Programming Important instructions on how to create a user program
User Management User management for accessing to the HIMax controllers
Diagnosis Summary of the diagnostic options
Specifications, Dimen-
sioning
Data related to the entire system. Data concerning the individual
components are specified in the corresponding manual
Lifecycle Phases of one HIMax system lifecycle
 Installation
 Start-up
 Service and maintenance
HIMax Documentation
and Support
Overview of the documentation and on how to get access to the
support
Appendix
 Configuration examples for the HIMax systems
 Glossary
 Index of tables and index of figures
 Index
1.2 Target Audience
This document addresses system planners, configuration engineers, programmers of
automation devices and personnel authorized to implement, operate and maintain the
devices and systems. Specialized knowledge of safety-related automation systems is
required.
All staff members (planning, installation, commissioning) must be informed about the risks
and potential consequences resulting from the manipulation of a safety-related automation
system.
Planners and configuration engineers must have additional knowledge about the selection
and use of electrical and electronic safety systems within automated systems, e.g., to
prevent improper connections or faulty programming.
The operator is responsible for qualifying the operating and maintenance personnel and
providing them with appropriate safety instructions.
Only staff members with knowledge of industrial process measurement and control,
electrical engineering, electronics and the implementation of PES and ESD protective
measures may modify or extend the system wiring.

HIMA HIMax Specifications

General

Brand	HIMA
Model	HIMax
Category	Control Systems
Language	English