116
_____________________________________________________________________________________________
8.3 GP-IB Command
______________________________________________________________________________________________
Command Function
GTL Go To local
The remote state is canceled, and the system goes into the local
state.
LLO Local Lock Out
All keys, including the
LOCAL
, becomes out of operating.
DCL Device Clear
Clears the input buffer and the output queue.
SDC Selected Device Clear
Clears the input buffer and the output queue.
GET Group Excute Trigger
Perform one-shot measurement.
NOTE
Using the GET (GroupExecute Trigger) command in internal trigger mode will
produce an execution error.
:TRIGGER:SOURCE
EXTERNAL
Message Code Table Common command
Message reference Initialize Item List
Common command
8.3 GP-IB Command
Interface functions permit use of the following commands:
The following items are the same as for the RS-232C interface. See Chapter
7 "RS-232C Interface."
To Next Page
Loading...
