Hioki 3237 - Comparator Buzzer Sound

34
_____________________________________________________________________________________________
5.2 Comparator Buzzer Sound
______________________________________________________________________________________________
NOTE
The unit is set to "
HL
" at the factory before shipment.
5.2 Comparator Buzzer Sound
Set the buzzer to sound at comparator determination.
1
.
Press
SHIFT
.
"
SHIFT
"
lights up on the display.
2
.
Press
COMP
. The comparator buzzer sound setup screen opens, and the
current setting for the comparator buzzer flashes.
3
.Press to select the comparator determination that should activate the
buzzer.
"HL" : The buzzer beeps when the determinati on is Hi or Lo.
"In" : The buzzer beeps when the determination is In.
"
OF
" : The buzzer is not activated to beep, regardless of the comparator
result.
4
.
Press
ENT
. You are returned to the measurement screen.