Hioki 3237 - Remote Function

39
_____________________________________________________________________________________________
5.7 Remote Function
______________________________________________________________________________________________
NOTE
Even after remote status has been cleared, the unit will reenter remote
status if externally controlled through the RS-232C or GP-IB interface.
When the trigger source is external (
:TRIGGER:SOURCE_EXTERNAL
),
M.TRIG
can be used even while the unit is in remote status.
5.7 Remote Function
This unit can be controlled externally through the RS-232C or GP-IB
interface. When the unit is placed in remote status (remote operation state),
"RMT" on the display lights up, and the keys on the front panel are disabled.
Clearing the Remote function
Pressing
LOCAL
clears the Remote function.