Hioki 3237 - Key Operation Sound

37
_____________________________________________________________________________________________
5.5 Key Operation Sound
______________________________________________________________________________________________
5.5 Key Operation Sound
The setting made here determines whether or not the key operation sound
should be emitted when a key is pressed on the front panel of the main unit.
1
.
Press
SHIFT
.
"
SHIFT
"
lights up on the display.
2
.
Pressing
ENT
displays the menu screen.
3
.Press to display the key operation sound setup screen.
4
. Pressing causes the current setting for the key operation sound to flash.
"On": Key operation sound emitted
"
OF
": Key operation sound not emitted
5
.Press to select On or Off.
6
.
Pressing
ENT
causes
"
bEEP
"
to flash.
7
.
Press
ENT
again to define your selection.