Hioki 3237 - Low-Power Resistance Measurement (2-Terminal)

14
_____________________________________________________________________________________________
3.2 2-Terminal Resistance Measurement
______________________________________________________________________________________________
3.2.2 Low-power Resistance Measurement (2-Terminal)
1
. Make sure that "SHIFT" does not light on the display.
2
.Press
LPΩ
."
2W
"(3239) and "
LP
" lights up on the display.
3
.Press to select a range. Or press
AUTO
to select Auto Range.
(See 4.1 Selection of Measurement Range.)
4
.Press
SMPL
to select a sampling period.
(See 4.2 Switching of Sampling Period.)
5
. Performs zero-ajust for the 3237/38/39.
(See 4.3 Zero Ajust Function.)
6
. Connect the test lead to the sample being measured and read the value.