Hioki 3237 - Page 138

126
_____________________________________________________________________________________________
10.1 General Specifications
______________________________________________________________________________________________
Size & Weight Approx. 215W x 80H x 265D mm (8.46"W x3.15"H x10.43"D) (without protrusions)
Approx. 2.6 kg (9.2 oz.)
Accessories L9170-10 TEST LEAD 1
Instruction manual 1
Power cord 1
Spare fuse 1 each
T0.5 AL/ 250 V, φ 5.2 mm × 20 mm (100/120 V) (Littelfuse,INC 218.500)
T0.25 AL/ 250 V, φ 5.2 mm × 20 mm (220/240 V) (Littelfuse,INC 218.250)
F2.0 A/250 V, φ 5mm × 20 mm (Littelfuse,INC 216002)
*
* for the 3238/39
Options 9081 EXTERNAL SHUNT
L9170-10 TEST LEAD
9010-50 CLAMP ON PROBE
9132-50 CLAMP ON PROBE
9018-50 CLAMP ON PROBE
9704 CONVERSION ADAPTER
9637 RS-232C CABLE (9 pin-9 pin/ cross)
9638 RS-232C CABLE (9 pin-25 pin/ cross)
9151-02 GP-IB CONNECTOR CABLE (2 m)
9151-04 GP-IB CONNECTOR CABLE (4 m)
L2107 CLIP TYPE LEAD
9326 CONNECTION CORD
(Shield wire: for low voltage and high resistance)
9452 CLIP TYPE LEAD
9453 FOUR TERMINAL LEAD
9454 ZERO ADJUSTMENT BOARD
9455 PIN TYPE LEAD
9461 PIN TYPE LEAD
9442 PRINTER
9443-01 AC ADAPTER (for printer/ for Japan)
9443-02 AC ADAPTER (for printer/ for EU)
9444 CONNECTION CABLE (for printer)
1196 RECORDING PAPER (for printer)
Standards
Safety
EMC
EN61010, Pollution Degree 2
Lo terminal: COM terminal, A-terminal, SENSE terminal
500 V (anticipated transient overvoltage 2.5 kV)
Measurement categories II 300 V (anticipated transient overvoltage 2.5 kV)
Hi terminal: V
Ω
CLAMP terminal
1000 V (anticipated transient overvoltage 4 kV)
Measurement categories II 600 V (anticipated transient overvoltage 4 kV)
EN61326