Hioki 3237 - Page 64

52
_____________________________________________________________________________________________
7.1 Preparing for Data Transfer
______________________________________________________________________________________________
NOTE
The unit is shipped from the factory with the interface set to RS-232C.
(3) 3237/38/39 Interface Setting
Designate 3237/38/39 Interface setting "
rS"(RS-232C) to enable 3237/38/39
Interface to communicate with personal computer.
1
.
Press
SHIFT
.
"
SHIFT
"
lights up on the display.
2
.
Pressing
ENT
displays the menu screen.
3
.
Press to display the interface setup screen.
4
.
Pressing causes the interface currently set to flash.
"
rS
" : RS-232C
"
Prn
" : Printer
"
gPIb
" : GP-IB
5
.
Press to select
RS-232C ("
rS
")
.
6
.
Pressing
ENT
causes
"
IF
"
to flash.
7
.
Press
ENT
again to define your selection.