7.4 Using the Software
If the data has not already been saved, the following dia-
log box will appear. Click [Yes] to save the data if
desired.
Tables of permissible value transfer will begin.
2.
After tables of permissible value transfer is complete,
click [OK].
• Transfer takes approximately six seconds.
• Do not turn off the power to the instrument or discon-
nect the USB cable during transfer. Doing so will dam-
age the transfer of tables of permissible values.
• The transfer time given is an approximation. The actual
time needed may vary depending on the processing
speed of the personal computer used.
Click
Click
To Next Page
Loading...
