索引
4
3
2
1
7
6
5
10
9
8
We define measurement tolerances in terms of f.s. (full scale),
rdg. (reading) and dgt. (digit) values, with the following mean-
ings:
f.s. (maximum display value or scale length)
The maximum displayable value or scale length. This is usually
the name of the currently selected range.
rdg. (reading or displayed value)
The value currently being measured and indicated on the mea-
suring instrument.
dgt. (resolution)
The smallest displayable unit on a digital measuring instrument,
i.e., the input value that causes the digital display to show a "1"
as the least-significant digit.
Notation of the This Manual
Indicates a prohibited action.
(⇒ P. ) Indicates the location of reference information.
Indicates quick references for operation and reme-
dies for troubleshooting.
* Indicates that descriptive information is provided
below.
Accuracy
To Next Page
Loading...
