8.1 General Specifications
索引
4
3
2
1
7
6
5
10
9
8
Specifications
Auto-memory Feature
Details of
operation
Saves measured value data automatically
when held.
Saved data can be cancelled by pressing the
CLEAR key.
Initial status OFF
Auto-power-save Feature (power on option)
Details of
operation
Cuts off power to the instrument automatically
when it has not been used for ten minutes or
longer and detection of constant-current irregu-
larities has continued for ten minutes or longer
This feature is cancelled during data communi-
cation using the PC application
Comparator Buzzer
Details of
operation
OFF
ON (Sounds when result is PASS)
ON (Sounds when result is FAIL / WARNING)
Initial status ON (Sounds when result is FAIL / WARNING)
Battery Level Indicator
Details of
operation
Remaining battery power shown as zero at 8.0
V (
± 0.2 V)
(Measurement functions stopped)
Power turned off at 7.6 V (
± 0.2 V)
System Reset (power on option)
Details of
operation
All settings except data and time, comparator
no., and saved data returned to initial configu-
ration
To Next Page
Loading...
