6.5 System Reset
索引
4
3
2
1
7
6
5
10
9
8
Other Features
Initial Configuration Conditions
(Factory Settings)
Resistance range 3.000 mΩ
Voltage range 6.000 V
Average range OFF
Zero-adjustment feature Releasing
Auto-hold feature OFF
Auto-memory feature OFF
Comparator feature OFF
Comparator buzzer setting WARNING/FAIL (ON)
Auto-power-save feature ON
• When the system-reset screen has been dis-
played unintentionally, turn the power on again.
The instrument's settings will be restored without
resetting the system.
• Refer to "Section 5.5 Deleting Saved Data" (⇒
p.69) for methods of deleting saved measure-
ment data.
To Next Page
Loading...
