7.3 Installing the USB Driver
4.
Following the instructions in the [Found New Hardware
Wizard] dialog box, install the driver.
Procedures for using the Found New Hardware Wizard
differ by operating system used. Driver installation meth-
ods for each operating system are described below.
"Section 7.3.1 For WindowsXP" (⇒ p.91)
"Section 7.3.2 For Windows2000" (⇒ p.94)
"Section 7.3.3 For WindowsMe" (⇒ p.97)
"Section 7.3.4 For Windows98SE" (⇒ p.100)
(WindosXP used)
If after installing the driver you connect the instru-
ment to the personal computer using a different
USB port, the "Found New Hardware" window will
appear again and the Found New Hardware Wiz-
ard will start up. Use this wizard to install the driver
again for this port.
To Next Page
Loading...
