Error code
(SSB2)
Details
FA32 There is a pinned track on the volume that has been specified as the
secondary volume.
FA33 You cannot create the GAD pair because the volume that has been
specified as the secondary volume is in one of the following statuses:
• Blocked
• Being formatted
• Read only
FA35 You cannot create the GAD pair because the volume that has been
specified as the secondary volume is blocked.
FA37 You cannot create the GAD pair because the volume that has been
specified as the secondary volume is a migration volume of a product of
another company.
FA38 You cannot create the GAD pair because the volume that has been
specified as the secondary volume is not OPEN-V.
FA3A You cannot create the GAD pair because the capacity of the volume that
has been specified as the secondary volume is larger than the maximum
capacity of a GAD pair that can be created.
FA3B You cannot create the GAD pair because the volume that has been
specified as the secondary volume is being used by nondisruptive
migration.
FA3C The device type of the volume that has been specified as the secondary
volume is not supported.
FA3E The DKC emulation types of the storage systems at the primary site and
the secondary site are inconsistent.
FA3F No program product of global-active device is installed in the storage
systems at the secondary site.
FA40 The shared memory that is required to create a GAD pair is not installed on
the storage system at the secondary site.
FA41 The volume that has been specified as the secondary volume is not
installed.
FA42 You cannot create the GAD pair because the storage system cache at the
secondary site is in one of the following statuses:
• One side is blocked or is transitioning to being blocked
• One side is recovering.
• Recovering
FA43 You cannot create the GAD pair because the remote path from the storage
system at the secondary site to the storage system at the primary site is in
either of the following status:
• The number of remote paths is 0 (unspecified).
• The number of remote paths is less than the minimum number.
FA44 You cannot create the GAD pair because the volume that has been
specified as the secondary volume is a mainframe volume.
Troubleshooting
9-11
Hitachi Virtual Storage Platform G1000 Global-Active Device User Guide
To Next Page
Loading...
