Black plate (16,1)
Holden WM Caprice Owner Manual (MY12.5) - 2012 - CRC 1st Edition - 6/28
12
9-16 Driving and Operating
4. Release both the accelerator
pedal and the collar.
After a few seconds, the
animation reverts to the original
trip computer display.
CRUISE ON or CRUISE
ACTIVE appears at the top of
the display.
Adjusting the set speed
To reduce the set speed, rotate and
hold the collar down to the
SET-DECEL position.
To increase the set speed, rotate
and hold the collar up to the
RES-ACCEL position.
After it is released, the new speed
will be maintained.
To change the speed in 1 km/h
increments, momentarily rotate the
collar.
Pausing cruise control
1. Press the brake pedal or press
the ON-OFF/CANCEL switch
once. Cruise control deactivates.
The Cruise Inactive animation
is displayed but the speed is
retained in memory.
2. To regain the stored speed,
momentarily rotate the collar to
the RES‑ACCEL position.
Holding the RES-ACCEL
position will cause the vehicle t o
accelerate.
Switching cruise control off
Press the ON-OFF/CANCEL switch
twice.
The Cruise Off animation is
displayed.
Notes about cruise control
.
Pressing the ON-OFF/CANCEL
switch once pauses cruise
control but keeps the speed in
memory.
.
A second press switches the
system off and removes the
speed memory.
To Next Page
Loading...
Need help?
General
