EasyManua.ls Logo

Honeywell 301C - Specifications

Honeywell 301C
232 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
510324 301C User Manual 107
4/07 Honeywell
Specifications
Specifications
Power requirements 301C 17-27 Vac, 50/60 Hz, 8.64 VA
18-36 Vdc, 350mA @ 24 Vdc (8.4 VA)
Operating temperature range -20ºC to 50ºC (-4ºF to 122ºF)
Operating humidity range 0 to 95% RH (non-condensing)
Operating altitude Up to 3000 m (9843 ft)
Network capacity Up to 96 transmitters, 32 per channel
Channels 1, 2 = Modbus and Vulbus
Channel 3 = Modbus only
Channel 4 = slave communication (i.e.
BACNet use)
Communication Up to 609m (2,000 ft) per channel
(length of lines) T-tap maximum = 20m (65 ft) per t-tap,
overall total of 40m (130 feet)
Wireless communication
range:
30m (98.5 ft)
Wireless communication ISM worldwide, range 30 m indoor
User interface Graphic 122 x 32 dot matrix backlit display
User friendly keypad
Visual indicators Power Green LED
Alarm A, B, C Red LED
Fault Amber LED
Tx Amber LED
Rx Green LED
Outputs 4 DPDT relays
Output rating 5A, 30Vdc or 250 Vac (resistive load)
Audible alarm 65dBA at 1 m (3 ft)
Time delays Programmable Before and After delays
Battery 3 volt lithium battery
Enclosure NEMA 4X, ABS-polycarbonate - indoor use
Dimensions (HxWxD) 28 x 20.3 x 7cm (7.99” x 11.02” x 2.76”)
Certifications ANSI/UL 61010-1
CAN/CSA C22.2 No. 61010-1
ETL 116662

Table of Contents

Related product manuals