Honeywell 301C User Manual

510324 301C User Manual 45
4/07 Honeywell
System Programming
Event Menu
Action Menu
Actions are comprised of two parameters:
Target Indicates which component is responsible for the action to be
taken;
Tx (transmitter)
Re (Relay/Annunciator)
Ctrl (Controller)
Relay Indicates which of three possible outputs will be activated
when the event is true;
#XX (activates the component’s #xx relay), Buzzer (activates
the component’s audible alarm)
ALL (activates the relays and audible alarms)
Example: Tx 007 detects a concentration exceeding the set values.
The target (controller) triggers relay 1 connected to that event (a fan
perhaps).
3. Events 001
-Action-
Target: Ctrl
Relay: #01

Honeywell 301C Specifications

General

Controller Type	Temperature Controller
Control Mode	ON/OFF, PID
Input Voltage	100-240 VAC
Input	Thermocouple, RTD
Output	Relay, SSR
Operating Temperature	0 to 50°C
Contact Rating	5A @ 250 VAC (Relay)