Honeywell 301C User Manual

90 301C User Manual 510324
Honeywell 4/07
System Programming
Wireless Network Menu
New Node Menu
The New Node menu allows users to add new nodes to the existing
network, assigning a specific ID number to its MAC address.
• Scroll to highlight New Node and press Enter to select
• In the New Node window, enter the desired ID value in the VAL field
and press Enter
• Press Enter to confirm
• When the MAC 1st part screen appears, enter the first 8 digits of
the new node’s MAC address* and press Enter
• Press Enter to confirm
• When the MAC 2nd part screen appears, enter the last 8 digits of
the new node’s MAC address and press Enter
• Press Enter to confirm
*The node’s MAC address is printed on the node’s housing.
Note: If you assign an ID number that already exists, this function will
not be completed.
Wireless Network
4. New Node
5. Hibernate
6. Reset Network
MAC 1st part
VAL : 00155F00
MAX : FFFFFFFF
MIN : 00000000
MAC 2nd part
VAL : 80000024
MAX : FFFFFFFF
MIN : 00000000
New Node
VAL : 121
MAX : 180
MIN : 121

Honeywell 301C Specifications

General

Controller Type	Temperature Controller
Control Mode	ON/OFF, PID
Input Voltage	100-240 VAC
Input	Thermocouple, RTD
Output	Relay, SSR
Operating Temperature	0 to 50°C
Contact Rating	5A @ 250 VAC (Relay)