Honeywell 301C User Manual

86 301C User Manual 510324
Honeywell 4/07
System Programming
Wireless Network Menu
Nodes Menu
The Nodes menu displays a multiple-item node information list. Use
the left and right keypad arrows to scroll between nodes and then use
the up or down keypad arrows to scroll through the information list for
each node.
Each line represents specific information, as shown in the screen
(above):
Line 1 displays the device’s network identification (the last two digits
of a hexadecimal ID, example 79) and controller reference
number (121) for the specific transmitter.
Line 2 displays the device’s MAC address
Line 3 displays the type of product (VA301W).
The screen can only display three items at one time, so you will need to
use the up or down arrows to scroll through the list
Nodes
1. ID 121 (79h)
2. 7B7177EFACE0049
3. Product VA301W

Honeywell 301C Specifications

General

Controller Type	Temperature Controller
Control Mode	ON/OFF, PID
Input Voltage	100-240 VAC
Input	Thermocouple, RTD
Output	Relay, SSR
Operating Temperature	0 to 50°C
Contact Rating	5A @ 250 VAC (Relay)