Honeywell 301C User Manual

38 301C User Manual 510324
Honeywell 4/07
System Programming
Tx Info Menu
Status Code
This screen displays transmission (Tx) or node status (displayed for
wireless devices only) and sensor status for the selected device
address in hexadecimal values. This screen is for information
purposes only and the information displayed cannot be modified.
Note: The Status Code screen provides important information to
qualified personnel for troubleshooting pusposes.
Erase Current Tx
This function allows you to erase the configuration or to change the Tx
address for the displayed component.
Note: Selecting erase current Tx only erases the current device entry
Tx Info configuration. No other data is erased.
1. Tx Info 121
-Status Code-
Tx Status: 12FAh
Snsr status: 4407h
1. Tx Info 001
erase current Tx
Change Tx Address

Honeywell 301C Specifications

General

Controller Type	Temperature Controller
Control Mode	ON/OFF, PID
Input Voltage	100-240 VAC
Input	Thermocouple, RTD
Output	Relay, SSR
Operating Temperature	0 to 50°C
Contact Rating	5A @ 250 VAC (Relay)