Honeywell 301C User Manual

92 301C User Manual 510324
Honeywell 4/07
System Programming
Wireless Network Menu
Status Log Menu
The Status Log file, named wyymmddq.log, that will be recorded on
the SD card contains 27 columns of information (as in the sample
above) that correspond to each of the first 27 fields in the Nodes Menu.
The resulting file can then be copied to a computer and consulted or
printed, as needed.
Consolidate Route Menu
Although nodes will always look for the best route to the controller, this
command forces all nodes to search for the shortest communication
route, with the least hops, to the controller using an alternate parent.
Wireless Network
5. Hibernate
6. Reset Network
7. Status Log NoLog
Status Log
Enter to confirm
Esc to cancel
Status Log
Log
Wireless Network
6. Reset Network
7. Status Log NoLog
8. Consolidate Route
Consolidate Route
Enter to confirm
Esc to cancel
Consolidate Route
VAL : 00060
MAX : 65535
MIN : 00000

Honeywell 301C Specifications

General

Controller Type	Temperature Controller
Control Mode	ON/OFF, PID
Input Voltage	100-240 VAC
Input	Thermocouple, RTD
Output	Relay, SSR
Operating Temperature	0 to 50°C
Contact Rating	5A @ 250 VAC (Relay)