Honeywell 301C User Manual

64 301C User Manual 510324
Honeywell 4/07
System Programming
Network Menu
Network Menu
The Network menu allows you to either reset or scan network device
information.
This menu offers four options, divided into two screens; the first screen
contains three options:
Reset Database: Resets all network device Tx information in
the database. This only resets the Tx
infomation for the network device. It does not
affect programmed Groups or Events.
Network Scan: Begins an auto-detect of all network devices
that allows the system to configure the Tx
database for network devices (i.e. it will scan
and add new devices but will not overwrite or
erase the old database)
Reset and Scan: Performs both previous functions
simultaneously.
Note: Once you have selected one of these options, you must wait until
the controller completes the process. You cannot interrupt or
stop the process once it has begun.
7. Network
Reset Database
Scan Network
Reset and Scan

Honeywell 301C Specifications

General

Controller Type	Temperature Controller
Control Mode	ON/OFF, PID
Input Voltage	100-240 VAC
Input	Thermocouple, RTD
Output	Relay, SSR
Operating Temperature	0 to 50°C
Contact Rating	5A @ 250 VAC (Relay)