Honeywell 301C User Manual

510324 301C User Manual 43
4/07 Honeywell
System Programming
Event Menu
Event Menu
Though the controller has a default setting for Event configuration (as
shown below), the Event menu is programmable. Event programming
lets you define specific actions:
Action: What will be done if programmed criteria are reached
Delay: Defines the length of time to wait before taking an
action on an event and time to wait after an event has
returned to normal before the action output is
returned to normal state.
Conditions: AND, OR or none (---); equations that allow more
detailed control of an event
Coverage Determines the period during which the event is
period: applicable
Status: Disables or enables a programmed Event
disabled:
Database: Erases the selected event or all events

Honeywell 301C Specifications

General

Controller Type	Temperature Controller
Control Mode	ON/OFF, PID
Input Voltage	100-240 VAC
Input	Thermocouple, RTD
Output	Relay, SSR
Operating Temperature	0 to 50°C
Contact Rating	5A @ 250 VAC (Relay)