72 301C User Manual 510324
Honeywell 4/07
System Programming
Tests Menu
Normal Mode
This is the system’s normal (default) operation mode. When the
system is in normal mode, some values can be changed without
interrupting services. When a value has been changed in any of the
menu fields, the change will take effect when you return to the main
menu screen.
Single Tx Mode
This mode allows you to analyse transmitters one at a time, or single.
The controller polls only the selected device, which subsequently has
its information updated. This mode does not interfere with Event
Evaluation functions.
Debug Mode
This mode allows you to evaluate and test complete system operation
without affecting operations (outside of debug mode). Events are
evaluated and displayed as necessary but no action is triggered.
To Next Page
Loading...
