Honeywell 301C User Manual

30 301C User Manual 510324
Honeywell 4/07
System Programming
Tx Info Menu
Product and Sensor Types
This is a list of all the (preprogrammed) product types available from
the Identification option in the Tx Info menu.
The order of the products below is not necessarily the order in which
they will appear in the controller
* Std.Device represents the S301M, 90DM4, 420MDBS and 301ADI.
Note: When Group is selected as a product type, the remaining Tx
INFO screens are not accessible (because each product in the
group has already been individually programmed). Only the
Ident and Erase current Tx screens will be available.
Product Types
Addresses 1-96
(?) RgRt3 901T
301D2 301AP 201R
90DM3R SQN8X 201T
301IRF 301EM 90DM2
IRT100 301EMRP 201D
EC-F9 GsPnt2 301D
201T2 S301RLC NotVul
301T Std.Device* Group (see note)
GsPnt
Product Types
Addresses 97-120 Addresses 121-170
301ADI (?)
(?) 301W
301RW
301RPT
1. Tx Info 121
-Ident-
301W
CO2 (IR)

Honeywell 301C Specifications

General

Controller Type	Temperature Controller
Control Mode	ON/OFF, PID
Input Voltage	100-240 VAC
Input	Thermocouple, RTD
Output	Relay, SSR
Operating Temperature	0 to 50°C
Contact Rating	5A @ 250 VAC (Relay)