42 301C User Manual 510324
Honeywell 4/07
System Programming
Groups Menu
Deleting Groups
You can use the empty all groups command to delete all groups
previously programmed in the controller.
Single groups can be deleted with a simple procedure:
• Scroll to the first transmitter in the group list,
• Select the transmitter (its address blinks) and scroll to <del> (<del>
erases the entry and <end> marks the end of the stack)
• Press enter and the group is emptied.
This procedure makes it possible to delete one, several or all entries
previously included in a group.
Note: You can create up to 126 groups, with a maximum of 128
members each.
To Next Page
Loading...
