Honeywell 301C User Manual

510324 301C User Manual 31
4/07 Honeywell
System Programming
Tx Info Menu
This is a list of all the (preprogrammed) sensor types available from the
Identification option in the Tx Info menu.
The sensor type list applies to address ranges 1-96 and is not
dependent on the type of product selected. Devices in the address
range from 97-170 will display a BACNet object identifier, rather than a
sensor type.
*An additional Product Type, simply called “Group”, represents a group
created in the Groups Menu in the controller. When scrolling through
the available product type list, this name will appear as many times as
there are groups created in the controller (example: Group 1, Group 2,
Group 3, etc.). If a group is selected as the product type, then the
sensor type options are limited to MIN, MAX and MEAN.
Sensor Types
CH4 CH4 COCl2 R123 (IR)
CO CO B2H6 Comb (IR)
NH3 CO H2 CO2 (IR)
NO2 H2 AsH3 CO2 (IR)
HCL SO2 ClO2 R245A (IR)
R11 H2S PH3 FE227 (IR)
R12 ETO CO R404A (IR)
R22 NO Unknown IR sensor R507A (IR)
R134A Cl2 Comb (IR) R401A (IR)
R125 SIH4 R11 (IR) R13B1 (IR)
R123 HCN R12 (IR) R23 (IR)
F2 O3 R22 (IR) No sensor
HF HBr R134A (IR)
Comb BCl3 R125 (IR)
1. Tx Info 121
-Ident-
301W
CO2 (IR)

Honeywell 301C Specifications

General

Controller Type	Temperature Controller
Control Mode	ON/OFF, PID
Input Voltage	100-240 VAC
Input	Thermocouple, RTD
Output	Relay, SSR
Operating Temperature	0 to 50°C
Contact Rating	5A @ 250 VAC (Relay)