Honeywell 301C User Manual

44 301C User Manual 510324
Honeywell 4/07
System Programming
Event Menu
The system has a default setting for the actions to execute:
• Relay No. 1 will be activated when Alarm A is reached on any
transmitter connected to the networker
• Alarm B will trigger relay No. 2
• Relay No. 3 will be activated when Alarm C is reached on any
transmitter connected to the network
• Pressing the silence keypad button will acknowledge the latched
events (if any) and silence the buzzer.
• Relay No. 4 will be activated in the event that on any transmitter
connected to the network is in fault
3. Events 001
-Delays-
Before: 99min
After: 01min
3. Events 001
-Action-
Target: Ctrl
Relay: #01
3. Events 001
1/3 Gr036
=2.01% AND
3. Events 001
-Coverage Period-
All day
All week
3. Events 001
-Database-
Erase current event
Erase all events
3. EVENEMENT 001
-Status : disabled-
Enable event
.

Honeywell 301C Specifications

General

Controller Type	Temperature Controller
Control Mode	ON/OFF, PID
Input Voltage	100-240 VAC
Input	Thermocouple, RTD
Output	Relay, SSR
Operating Temperature	0 to 50°C
Contact Rating	5A @ 250 VAC (Relay)