Honeywell Apex - Page 84

84
MAN0604_Issue 09_02-2013 Apex
2110M8030
4. OPERATION
(3) FittheFlowHousingontotheCertiedSensorbody.
Reverse the cap removal procedure. The following diagram shows the Flow Housing
accessoryttedtotheCertiedSensor.
Certifie
d
Sensor
Flow
Housin
g
(4) Press the esc button at the Transmitter Unit.
The Main Menu is displayed.
Main Menu
Calibration Menu
Configuration Menu
Display Menu
History Log Menu
Change Passwords Menu
Reset Passwords
(5) Navigate to the Calibration Menu option.
Use the up/down keys.
(6) Press ok.