EXCEL CARE CONTROL ICONS ALPHABETIC REFERENCE
213 74-5577–33 (US)
EN2B-0184 GE51 R0518 (Europe)
RIA Attributes Table The following table lists attributes that you can select for the various point types.
NOTE: The list of attributes presented in the icon change depending on the type of
connection. For example, if the output is connected to a digital type
connection (if it is a point or another icon), then the list of available
attributes consists of only the ones marked dig in this this table. The same
type of list is available when an analog type connection is made; only the
ana are available.
A special condition exists when the attribute “Manual Value” is selected.
The available list only consists of Manual Value and No Attribute.
Global Broadcast Threshold
Write Protection Priority*
*Referred to as Access Control for Flex Points
**Operational status can be 1 for manual or 0 for automatic.
X = Read access
AI = Analog input
PAI = Analog input pseudopoint (VA)
AO = Analog output
PTOT = Totalizer pseudopoint (VT)
DI = Digital input
PDI = Digital input pseudopoint (VD)
DO = Digital output
3POS = Three-position analog output
GA = Global analog
GD = Global digital
TOT = Totalizer (fast or slow)
Flex = Flex (digital output with feedback, multi-staged, and pulse_2)
RIA Example See the Operating Pump Switchover application in the Examples chapter for a
description of how to use RIA to switch pump operation between two pumps
dependent on hours of operation.
To Next Page
Loading...
Need help?
General
