Table 8-5 UseMode Settings—Properties panel options (continued)
Option Description
no driver compatibility problems. Use this option in the following
situations.
◦ The product is directly connected, but bidirectional communication
is not configured for the local port connection (USB, LPT, COM).
◦
A network print queue exists when the network printer server is
non-Windows based and the HP UPD cannot communicate directly
with the product.
When printing This list controls how the HP UPD prompts users who are associated to this
MPP when they select a destination printer based on the selection of one of
the following options.
NOTE: Selecting one of these options (with the exception of (Do not
specify)) overrides the local configuration.
●
(Do not specify).
Select this option to maintain local configuration.
●
Always prompt for the destination when printing a job.
Select this option to prompt users to select a destination printer each
time a job is sent.
●
Only prompt the first time a job is printed from an application.
Select this option to prompt users to select a destination printer only the
first time a job is printed from an application.
● Only prompt if the last known destination is no longer available.
Select this option to prompt users to select a destination printer only if
the last known destination is no longer available.
Enable services tab Select this option to enable the Services tab for users associated to this MPP.
When this option is selected, the following check boxes are automatically
selected and can be cleared, if necessary. (Selected by default.)
●
Enable online diagnostics
● Enable online support
●
Enable product manuals
●
Enable driver updates
● Enable supply ordering
5. Click Apply to save your changes, or click Hide to close the UseMode settings panel without
saving your the changes.
NOTE: You receive a prompt with an error message at the top of the screen if you click Apply
without providing enough information in the UseMode settings panel.
The following is an example of such an error message. Please review the following errors:
You specified creation of a new template for UseMode settings, but did not give a name.
6. Optionally, if no more properties have to be applied to the selected MPP, select one of the
options in the Update policy panel. For more information, see
Update an MPP on page 115.
ENWW Manage the HP UPD using HP MPA 107
To Next Page
Loading...
Need help?
General
