HP Apollo 4200 Gen9 - Page 10

Component identification 10
• Rear panel with the two-bay SFF hot-plug rear drive cage and two-slot PCI riser cage options
Item Description
1
PCIe3 x16 (16, 8, 4, 1) slot 7 for low-profile, standup expansion
board
1
2
PCIe3 x8 (8, 4, 1) slot 6 for low-profile, standup expansion board
1
3
PCIe3 x16 (16, 8, 4, 1) slot 5 for low-profile, standup expansion
board
1
4
SFF hot-plug drives
5
PCIe3 x8 (8, 4, 1) riser slot 4 for full-height, half-length expansion
board
2
6
PCIe3 x8 (8, 4, 1) riser slot 3 for full-height, half-length expansion
board
2
7
PCIe3 x16 (16, 8, 4, 1) slot 2 for low-profile, standup expansion
board or riser cage options
2
8
PCIe3 x8 (8, 4, 1) slot 1 for low-profile, standup expansion board
2
9
FlexibleLOM slot
2
10
Hot-plug power supply bay 1
11
Hot-plug power supply bay 2
12
USB 3.0 connectors
13
NIC 1/shared iLO connector
14
NIC connector 2
15
Video connector
16
Dedicated iLO management connector (optional)
1
The PCIe expansion slots 5-7 are associated with processor 2.
2
The PCIe expansion slots 1-4 and the FlexibleLOM slot are associated with processor 1.
• Rear panel with the six-bay SFF hot-plug rear drive cage option
Item Description
1
PCIe3 x16 (16, 8, 4, 1) slot 7 for low-profile, standup expansion
board
1
2
PCIe3 x8 (8, 4, 1) slot 6 for low-profile, standup expansion board
1