Software and configuration utilities 155
Software and configuration utilities
Server mode
The software and configuration utilities presented in this section operate in online mode, offline mode, or
in both modes.
Software or configuration utility Server mode
HPE iLO (on page 155)
Active Health System (on page 156)
RESTful API support for iLO (on page 157)
Integrated Management Log (on page 157)
Intelligent Provisioning (on page 157)
HPE Insight Diagnostics (on page 158)
Erase Utility (on page 158)
Scripting Toolkit for Windows and Linux (on page 159)
Service Pack for ProLiant (on page 159)
HP Smart Update Manager (on page 159)
HPE UEFI System Utilities (on page 159)
HPE Smart Storage Administrator (on page 162)
FWUPDATE utility (on page 164)
Product QuickSpecs
For more information about product features, specifications, options, configurations, and compatibility,
see the product QuickSpecs on the Hewlett Packard Enterprise website (http://www.hpe.com/info/qs).
HPE iLO
The iLO 4 subsystem is a standard component of ProLiant servers that simplifies initial server setup,
server health monitoring, power and thermal optimization, and remote server administration. The iLO 4
subsystem includes an intelligent microprocessor, secure memory, and a dedicated network interface.
This design makes iLO 4 independent of the host server and its operating system.
iLO 4 enables and manages the Active Health System (on page 156) and also features Agentless
Management. All key internal subsystems are monitored by iLO 4. If enabled, SNMP alerts are sent
directly by iLO 4 regardless of the host operating system or even if no host operating system is installed.
Using iLO 4, you can do the following:
• Access a high-performance and secure Integrated Remote Console to the server from anywhere in
the world if you have a network connection to the server.
• Use the shared .NET Integrated Remote Console to collaborate with up to four server administrators.
• Remotely mount high-performance Virtual Media devices to the server.
• Securely and remotely control the power state of the managed server.
To Next Page
Loading...
Need help?
General