Hardware options installation 51
Hardware options installation
Introduction
If more than one option is being installed, read the installation instructions for all the hardware options and
identify similar steps to streamline the installation process.
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives, power
input modules, and the internal system components to cool before touching them.
CAUTION: To prevent damage to electrical components, properly ground the server before
beginning any installation procedure. Improper grounding can cause electrostatic discharge.
Security bezel option
The security bezel helps prevent unauthorized physical access to the front panel components. Install the
security bezel and then lock it with the key provided with the kit.
Drive options
For a list of drive configurations supported in this server, see "Drive numbering (on page 15)."
The embedded Dynamic Smart Array B140i Controller supports SATA drive installation. For SAS support,
connect the drive to the onboard Flexible Smart Array P840ar Controller or to a Smart HBA or a Smart
Array Controller option.
For more information about product features, specifications, options, configurations, and compatibility,
see the product QuickSpecs on the Hewlett Packard Enterprise website (http://www.hpe.com/info/qs).
To Next Page
Loading...
Need help?
General